Flow rate test benches

TEST BENCH

FLOW RATE TESTS

Code: BPF-Q300-6
(Linear flow-rate tests and Kv coefficient calculation tests)

Hydraulic test bench for flow-rate tests with open drain and Kv coefficient calculation.

Main features:

Flow-rate range: 1,5-295 L/min
Maximum pressure at 300 L/min: 6 bar
DN25 and DN10 measurement lines

The BPF-Q series hydraulic benches are suitable to perform differential pressure tests for the calculation of Kv coefficient: the hydraulic plant is designed according to the Standard and a dedicated software permits to measure the pressure drop due to the components under tests subtracting the contribution of the test rig.

It is also possible to perform flow-rate tests with open drain with automatic linear increase of pressure.

For further details, please contact the technical department: info@giussanionline.it

AVAILABLE TYPES

BPF-Q300-6: 300 L/min - 6 bar

Flow-rate: 1,5-295 L/min
Maximum pressure at 300 L/min: 6 bar
Measurements lines: DN 25 and DN 10 (for accuracy better than 0,5% on the measure)

BPF-Q300-10: 300 L/min - 10 bar

Flow-rate: 1,5-295 L/min
Maximum pressure at 300 L/min: 10 bar
Measurements lines: DN 25 and DN 10 (for accuracy better than 0,5% on the measure)

BPF-Q600-6: 600 L/min - 6 bar

Flow-rate: 1,5-750 L/min
Maximum pressure at 600 L/min: 6 bar
Measurements lines: DN 40, DN 25 and DN 10 (for accuracy better than 0,5% on the measure)
Note: two-pumps system working in parallel

BPF-Q600-10: 600 L/min - 10 bar

Flow-rate: 1,5-750 L/min
Maximum pressure at 600 L/min: 10 bar
Measurements lines: DN 40, DN 25 and DN 10 (for accuracy better than 0,5% on the measure)
Note: two-pumps system working in parallel

BPF-Q1000-6: 1000 L/min - 6 bar

Flow-rate: 1150 L/min
Maximum pressure at 1000 L/min: 6 bar
Measurements lines: DN 50, DN 25 and DN 10 (for accuracy better than 0,5% on the measure)
Note: two-pumps system working in parallel

BPF-Q1000-10: 1000 L/min - 10 bar

Flow-rate: 1150 L/min
Maximum pressure at 1000 L/min: 10 bar
Measurements lines: DN 50, DN 25 and DN 10 (for accuracy better than 0,5% on the measure)
Note: two-pumps system working in parallel

Executable test

Executable test by installing optional equipment or specific software

Not available

Selected test

Software

Available software

AQ2TB-KV-LAB: software for the evaluation of the pressure loss and the calculation of the Kv coefficient through the measure of the differential pressure as a function of the flow-rate. The software provides the following information as a function of the differential pressure: flow-rate (in L/min and kg/min), speed of the fluid, coefficients Kv and Cv, the flow resistance coefficient (ζ) and Reynolds number.

AQ2TB-FLOW-LIN: flow-rate test with linear increase and/or decrease of pressure and multi-trace flow-rate/pressure or pressure/flow-rate charts.

AQ2TB-P-FLOW: software for pressure reducers testing with automatic or manual linear increase of flow-rate and measuring of outlet pressure. Up to 6 acquisitions on the same graph.

AQ2TB-FLOW-DP: software for flow-rate tests as a function of the pressure drop on the device under tests for the calculation of the characteristic curve of excess flow valves. Up to 6 acquisitions on the same graph.