Universal application for hydraulic tests for the verification and analysis of the functioning of sanitary taps, single lever mixers, thermostatic mixers and hydraulic devices such as valves, aerators and diffusers.
Software application to evaluate the tightness of the device under test when subjected to static pressure. The software also allows to evaluate the maximum pressure that the device under test can reach before the burst.
Automatic software for performing cycling pressure tests with water circulation (pressure range: 0,2÷12 bar) and water hammer tests without water circulation.
Automatic software for flow-rate tests with linear increase of pressure. Up to 6 tests can be viewed on the same chart and repeated, changing the position of the mechanism or the component under test.
Semi-automatic software for flow-rate tests and Kv coefficient calculation with measure of pressure loss.
The operator manually increases the flow-rate of the device under test and the software automatically associates, for each significant value of ΔP between the inlet and the outlet of the component, the corrisponding flow-rate value.
Software for automatic step flow-rate test with adjustable pressure slope and final tabulation of hot, cold and mixed water flow-rate, pressure and temperature.
Software for fidelity (hysteresis) and sensitivity tests with motor control and display of torque. It evaluates water temperature and torque as a function of the angular position of the control device.
Software for performing shut-off tests on thermostatic mixers, capable of detecting hot water loss in case of cold water failure, in accordance with D08 and NF Standards.
The software measures the quantity of water collected and calculates the final temperature variation.
Software for final testing of thermostatic cartridges and wall or flush mounting thermostatic mixing valves.
It allows to performe a driven, complete and quick test procedure with an high productivity per hour. It is possible to adjust all the test parameters and condition.
Software for BPV-T50-3-SWG thermal cycles test bench. The software is suitable to perform thermal cycle tests on multi-layer piping assemblies and fitting in accordance with the main Internation Standards.
It is possible to manage up to three test stations simultaneously.
Software for BP-RUMORE test bench; it permits a real-time evaluation of the noise generated by the device under test as a function of pressure and flow-rate. The software shows in real-time the noise spectrum measured by the sound level meter with A-weighting and corrected by the calibration matrix.
AQ2tb is the software installed on Giussani's test benches that allows to perform hydraulic and mechanical tests on sanitary taps, fittings, pipes and hydraulic devices in accordance with the main I nternational Standards.
The software acquires in real time all the physical parameters that characterize each test and provides a detailed graphical representation.
It is available in several languages and allows to use different measurement units
Software features
The main characteristics of the AQ2tb software are:
Universal application for hydraulic tests for the verification and analysis of the functioning of sanitary taps, single lever mixers, thermostatic mixers and hydraulic devices such as valves, aerators and diffusers.
Software application to evaluate the tightness of the device under test when subjected to static pressure. The software also allows to evaluate the maximum pressure that the device under test can reach before the burst.
Automatic software for performing cycling pressure tests with water circulation (pressure range: 0,2÷12 bar) and water hammer tests without water circulation.
Automatic software for flow-rate tests with linear increase of pressure. Up to 6 tests can be viewed on the same chart and repeated, changing the position of the mechanism or the component under test.
Semi-automatic software for flow-rate tests and Kv coefficient calculation with measure of pressure loss.
The operator manually increases the flow-rate of the device under test and the software automatically associates, for each significant value of ΔP between the inlet and the outlet of the component, the corrisponding flow-rate value.
Software for automatic step flow-rate test with adjustable pressure slope and final tabulation of hot, cold and mixed water flow-rate, pressure and temperature.
Software for fidelity (hysteresis) and sensitivity tests with motor control and display of torque. It evaluates water temperature and torque as a function of the angular position of the control device.
Software for performing shut-off tests on thermostatic mixers, capable of detecting hot water loss in case of cold water failure, in accordance with D08 and NF Standards.
The software measures the quantity of water collected and calculates the final temperature variation.
Software for final testing of thermostatic cartridges and wall or flush mounting thermostatic mixing valves.
It allows to performe a driven, complete and quick test procedure with an high productivity per hour. It is possible to adjust all the test parameters and condition.
Software for BPV-T50-3-SWG thermal cycles test bench. The software is suitable to perform thermal cycle tests on multi-layer piping assemblies and fitting in accordance with the main Internation Standards.
It is possible to manage up to three test stations simultaneously.
Software for BP-RUMORE test bench; it permits a real-time evaluation of the noise generated by the device under test as a function of pressure and flow-rate. The software shows in real-time the noise spectrum measured by the sound level meter with A-weighting and corrected by the calibration matrix.
New hydraulic comparison pump - BT series up to 3000 bar
