Titolo

Titolo

Vacuum pumps and systems

Slideshow

High vacuum pump RS9D
  • Flow rate: 180 L/min
  • Final vacuum: 1x 10 ˉ² mbar
  • Power: 370 W
  • Power supply: 230 V - 50/60 Hz
  • Weight: 12 kg
  • Size: 150 x 350 x 280 mm
  • Fiberglass blades
High vacuum pump RS3D
  • Flow rate: 46 L/min
  • Final vacuum: 1x 10 ˉ² mbar
  • Power: 120 W
  • POwer supply: 220/240 V - 50/60 Hz
  • Weight: 6,4 kg
  • Size: 150 x 267 x 250 mm
  • Fiberglass blades
Vacuum test device MV6-SYSTEM
  • Flow rate: 180 L/min
  • Final vacuum: 1x 10 ˉ² mbar
  • Power: 370 W
  • Power rate: 230 V - 50 Hz
  • Weight: 21 kg
  • Size: 265 x 360 x 340 mm
  • 20/10 sheet steel structure
  • N° 2 1/2 rotating connections
  • RS9D vacuum pump 
  • N° 2 supply and drain needle valves
  • N° 1 fine vacuum regolator
Fine vacuum regulator GH20VT
  • Flow rate: 0,04 L/min
  • Vacuum regolation: da 0 a 76,2 cm Hg
  • Weight: 1,3 kg
  • Sensitivity: 0,51 cm H2O
  • Connections: 1/4" NPT - 1/8" NPT
  • Temperature: da -29 °C a +66 °C
  • Body: brass
  • Diaphragm assembly: Buna "N"

corpo

Vacuum pumps are used to autonomously generate a vacuum value in order to be able to check and calibrate vacuum gauges.

The pumps are suitable for use in labs to generate vacuum values in relatively small volumes, such as the ones of instruments or even in small containers, tanks and pipes to be able to carry out calibrations or leak tests. 

The Mx vacuum value reached by these pumps can be as high as 10-2 mbar.

The pumps can come with a full series of analogue and digital pressure gauges used as reference instruments for the generated signal.

The MV6-SYSTEM device consists of a complete instrument to generate and adjust the vacuum value from 0 to the max vacuum value of the pump.

figli_giussani_prod eng

High vacuum pump RS9D
  • Flow rate: 180 L/min
  • Final vacuum: 1x 10 ˉ² mbar
  • Power: 370 W
  • Power supply: 230 V - 50/60 Hz
  • Weight: 12 kg
  • Size: 150 x 350 x 280 mm
  • Fiberglass blades
High vacuum pump RS3D
  • Flow rate: 46 L/min
  • Final vacuum: 1x 10 ˉ² mbar
  • Power: 120 W
  • POwer supply: 220/240 V - 50/60 Hz
  • Weight: 6,4 kg
  • Size: 150 x 267 x 250 mm
  • Fiberglass blades
Vacuum test device MV6-SYSTEM
  • Flow rate: 180 L/min
  • Final vacuum: 1x 10 ˉ² mbar
  • Power: 370 W
  • Power rate: 230 V - 50 Hz
  • Weight: 21 kg
  • Size: 265 x 360 x 340 mm
  • 20/10 sheet steel structure
  • N° 2 1/2 rotating connections
  • RS9D vacuum pump 
  • N° 2 supply and drain needle valves
  • N° 1 fine vacuum regolator
Fine vacuum regulator GH20VT
  • Flow rate: 0,04 L/min
  • Vacuum regolation: da 0 a 76,2 cm Hg
  • Weight: 1,3 kg
  • Sensitivity: 0,51 cm H2O
  • Connections: 1/4" NPT - 1/8" NPT
  • Temperature: da -29 °C a +66 °C
  • Body: brass
  • Diaphragm assembly: Buna "N"

News

11
March 2019

Giussani will be present at the 2019 ISH Fair in Frankfurt

20
May 2016

New hydraulic comparison pump - BT series up to 3000 bar

10
February 2014

Pyros family new models with higher performances and type approved by DNV

Contact us

Address

Via dei Crederi, 411
24045 - Fara Gera d'Adda
Bergamo - Italy

Phone/Fax

Ph: (+39) 0363-399019
Fax: (+39) 0363-398725

footerbottom

© Copyright 2017 Giussani Srl - All rights reserved.
VAT: 01496840164

Powered by Weblitz